rexroth博世力士樂伺服驅動器過熱警告維修：
E251含義：Motor Overtemperature Warning
電機過熱警告
Description:故障說明：
As soon as the temperwature warning threshold (145°C) is exceeded,
一旦超過溫度警告閾值（145°C）
warnig E251 is generated and the drive complies with the command value.，就會生成警告E251，驅動器符合命令值。
This state can last infinitely without a powering down occurring. Not until the temperature error threshold is exceeded will an immediate powering down take place.這種狀態可以無限持續，而不會發生斷電。直到超過溫度錯誤閾值，才會立即斷電。
See also F219 Motor Overtemperature Shutdown
另請參閱F219電機過熱停機
湖州力士樂驅動器修理：：
Cause:原因：
The motor became overloaded. The effective torque required of the motor
was above the allowable standstill continuous torque for too long.電機過載。電機所需的有效扭矩長時間高于允許的靜止持續扭矩。
Remedy:補救措施：
Check the installation of the motor.
檢查電機的安裝。
For systems which have been in use for a long time, check to see if the drive conditions have changed (inregards to pollution, friction, components which have been moved, etc)對于已使用的系統長時間以來，檢查驅動條件是否發生了變化（在污染、摩擦、移動的部件等）
轉載請注明出處：上海仰光電子科技專業伺服驅動器維修,伺服電機維修
本文鏈接：http://m.shandong24.com/fuwu/Services_Show23462.htm
伺服驅動器維修 伺服電機維修 觸摸屏維修 變頻器維修
聯系方式：
電話：021-50157782
手機：13817011982 微信同號
郵箱：[email protected]
聯系人：張工
網址：http://m.shandong24.com
【 我們確保修好測試好給客戶�。。。 �
上一篇：Beckhoff倍福工控機CP2215-0000開機無顯示故障檢測維修（可上機測試）
下一篇：沒有了
