力士樂伺服驅動器維修公司：上海仰光電子在力士樂REXROTH伺服維修方面已經形成一套完善的維修技術流程，擁有大部分力士樂型號維修軟硬件測試系統，兼維修技術經驗，經過數10多年的維修技術積累，博士力士樂維修修復率可達96%左右,現在我們主要談?wù)勛罱槍ακ繕夫?qū)動器hcs系列報E251故障維修成功案例：
博世力士樂伺服驅動器維修測試臺：
E251含義：Motor Overtemperature Warning
電機過熱警告
Description:
As soon as the temperwature warning threshold (145°C) is exceeded, warnig E251 is generated and the drive complies with the command value.一旦超過溫度警告閾值（145°C），就會生成警告E251，驅動器符合命令值。
This state can last infinitely without a powering down occurring. Not until the temperature error threshold is exceeded will an immediate powering down take place.這種狀態可以無限持續，而不會發生斷電。直到超過溫度錯誤閾值，才會立即斷電。
See also F219 Motor Overtemperature Shutdown
另請參閱F219電機過熱停機
Cause:原因：
The motor became overloaded. The effective torque required of the motor
was above the allowable standstill continuous torque for too long.電機過載。電機所需的有效扭矩長時間高于允許的靜止持續扭矩。
Remedy:
Check the installation of the motor. For systems which have been in use
for a long time, check to see if the drive conditions have changed (in
regards to pollution, friction, components which have been moved, etc)
檢查電機的安裝。對于已使用的系統長時間以來，檢查驅動條件是否發生了變化（在
污染、摩擦、移動的部件等）
轉載請注明出處：上海仰光電子科技專業伺服驅動器維修,伺服電機維修
本文鏈接：http://m.shandong24.com/fuwu/Services_Show12101.htm
伺服驅動器維修 伺服電機維修 觸摸屏維修 變頻器維修
電話：021-50157782
手機：13817011982 微信同號
郵箱：[email protected]
聯系人：張工
網址：http://m.shandong24.com
【 我們確保修好測試好給客戶�。。�！】
下一篇：常州INVY英威騰CHE100-011G-2變頻器OC報警故障維修
